How to Use Sea Foam in Oil

Benefits

  • Helps your crankcase run cleaner & last longer
  • Liquefies petroleum residues that restrict oil flow & engine lubrication
  • Cleans oil control rings & actuators
  • Dissolves & cleans harmful deposits throughout the crankcase, including diesel soot residues
  • Quiets noisy lifters

Directions

  • Determine how much Sea Foam to add to oil. Add 30mL for each liter of oil in the crankcase.
  • Remove oil filler cap and pour the recommended amount of Sea Foam directly into the engine crankcase. Do not exceed one treatment per oil change interval.
  • Drive 150 to 450 kilometers before every oil and filter change for best cleaning results, though Sea Foam can be added at any time between oil changes.

Summary

Sea Foam can be added to your engine oil as often as every oil change interval – just add to your engine’s oil filler opening. Make sure to check your oil regularly for clarity. Whenever it becomes dirty (goes from clear to dark), change the oil and filter.

When added to crankcase oil, Sea Foam Motor Treatment works to liquefy harmful residues and deposits that can restrict oil flow and engine lubrication. Sea Foam is safe for all motor oils, conventional and synthetic. Made from petroleum ingredients, Sea Foam does NOT contain harsh detergent or abrasive chemicals that can harm your engine or fuel system components.

It’s easy to use – just pour it in!

Watch The How 2 Video

ADD SEA FOAM TO YOUR OIL CRANKCASE – SUPER EASY!

Adding to crankcase oil is the #2 use of Sea Foam (in fuel is #1) by professional mechanics and DIYers. Great intro video on how to do it – super easy! Added to oil, Sea Foam liquefies heavier petroleum residues and deposits back into the fluid so everything drains away when it’s time to replace oil and filter. Pour it in every oil-change interval to keep oil flow passageways cleaner and help the engine last longer!

Was This Helpful?

Yes
No
99.25%
English